Vessel sink vanity combo – One-piece sink vanity not collect water and dirt around the joint between the sink and vanity as over-mount sinks often do while under mount sink if not installed properly can come loose from the vanity. Because of the larger size of the one-piece sink and vanity combination you need a large area away from the final location on the combo prepare for installation. Because your time with the installation, your sink and vanity will look good and stay in place for years to come.
Set the vessel sink vanity combo somewhere you can work at the top and bottom at the same time, like an old cupboard or interrupted between two saw horses. Screw the faucet handles and controls in place, tightening the nuts under the sink with a key. Bolt the tail portion to the sink drain and apply silicone caulk around the joint. Screw flexible rules for hot and cold water in the bottom of the assembly of the crane.
12 Picture Gallery: Install a Piece Vessel Sink Vanity Combo
Apply a thick layer of silicone caulk to the underside of the vessel sink vanity combo where it will touch the cabinet or base. Set the top of the vanity cabinet or base. Slide the vanity from left to right until the backsplash flush with the wall and the vanity is centered on the base or cabinet.
This post topic: VESSEL SINKS