Shower drain cover – Basement drains are typically installed during the construction of housing, allowing rain and water to drain from the basement before installing the roof. It is best to install a drain in the basement before the floor and the basement is finished, because once they are installed; the installation of a drainage system is more difficult and costly. Fortunately, you will not have to worry about installing a drainage system installed one if your contractor during construction. Then you can build your shower around the drain in the existing basement.
Place the shower drain in the drainage ditch outlet. The tube simply is flat in the ditch, and other pipes connected to it later. Place the shower drain tube inside the concrete footings and out through the hole in the base. Another drain pipe should go on the outside of the concrete base. These two drains are connected together with appropriately sized accessories shower drain cover.
12 Picture Gallery: Ideas of Shower Drain Cover
Connect the drain pipes inside and outside the pipe in the trench output using appropriately sized accessories. Choose an appropriate location basement where the drain is placed and a small piece of the drainpipe was. Surrounds the drain pipes with crushed gravel to prevent the ingress of sand through the drain pipes. Fill with crushed gravel soil or cover it with concrete. Basement drain tube can then be cut to a size and shower drain cover can be pasted on top of the drain pipe.
This post topic: Best Design Ideas