Japanese soaking – How to Build a Japanese bath. Construction in the past was made of wood, steel or ceramic, but nowadays is also made of fiberglass and acrylic. Build a Japanese soaking ideas, Decide on the material you want to build your bath tub. Traditional Japanese tubs were made of wood, especially cedar. You can opt for other wood, but make sure that the wood rough being wet several times in recent year’s environment will be.
Build Japanese soaking ideas, determine the dimensions of the bathtub and cut the material for assembling the sides and floor of the tub. Mount the tub enclosure according to the plans you made. Be careful to seal each and every case assembly, including soil with a suitable waterproof sealant. Silicone works well with most materials. Make a hole in the floor of the tub and install a drain. Be sure to connect the pipe to handle emptying the tub after bathing and seal the floor drain.
12 Picture Gallery: Build a Japanese Soaking Ideas
Build a Japanese soaking, Install the pipe to carry the source of hot and cold at the top of the bathtub water. Due to the possible large volume of water that may be necessary, depending on the size of your bathtub, you may want to install high – flow plumbing. Finish the outside of the tub as you want to help mix with your decor. If you placed outside, be sure to seal the material against inclement weather.
This post topic: Home Equipment