Large utility sink – Building a large utility sink using an old kitchen sink stainless steel offers a low cost alternative to buying a plastic or sink fiberglass center home improvement. This large utility sink project is ideal for the garden area or garage. Another advantage of building your own utility sink is that you can build based on the dimensions to suit your application. Additionally, the recycling or reuse of materials saves energy and natural resources of the planet.
Build a large utility sink, Measure and cut four pieces of two-by-fours to 48 inches long, two pieces in a length of 24 inches and two pieces in a length of 21 inches with a circular saw and a measuring tape. These parts provide the framework for the top of the large utility sink and a framework for a shelf under the sink.
12 Picture Gallery: Build a Large Utility Sink
Place two 48-inch pieces on one side of the flat surface of side about two feet away. Place a 24-inch piece of two-by-four on each end and tighten all parts using wood screws 3 inches and a screw gun. Repeat for the other pieces of 48 and 21 inches. Measure and cut four two-by-fours to 36 inches long legs act as the base of the sink. For shorter or higher large utility sink, adjust the length of the legs.
This post topic: BATHROOM SINKS